SULZER RTA 系列備件明細

2013年11月13日

SULZER RTA38 
1 T11365 MAIN BEARING IN 2-PARTS
2 T12241 PAD FOR THRUST BEARING
3 T12260 RING FOR THRUST BEARING
4 T12270 STOPPER IN THRUST BEARING COMPLETE
5 T12271 STOPPER BRIDGE FOR STOPPER T12270
6 T12274 STOPPER BRIDGE FOR STOPPER T12270
7 T12278 STOPPER PLATE FOR STOPPER T12270
8 T12282 STOPPER PLATE FOR STOPPER T12270
9 T12288 PLATE FOR STOPPER T12270
10 T12289 KEY FOR STOPPER T12270
11 T12290 KEY FOR STOPPER T12270
12 T12294 LOCKING PLATE FOR PLATE T12288
13 T12295 LOCKING PLATE FOR T12278
14 T12297 LOCKING PLATE FOR PLATE T12270
15 T21043 O-RING FOR WATER GUIDE RING T21025
16 T21270 O-RING FOR CYL LINER
17 T21271 O-RING FOR CYL LINER
18 T21401 CYLINDER LINER
19 T21500 LUBRICATING QUILL WITH ACCUMULATOR COMPL
20 T21505 DIAPHRAGM FOR ACCUMULATOR
21 T21506 PISTON FOR ACCUMULATOR
22 T21508 COMPRESSION SPRING FOR ACCUMULATOR
23 T21515 NON-RETURN VALVE FOR ACCUMULATOR
24 T21518 BALL FOR NON-RETURN VALVE
25 T21519 COMPRESSION SPRING FOR NON-RETURN VALVE
26 T21524 JOINT FOR LUBRICATING QUILL
27 T23101 SCRAPER RING IN 3-PARTS COMPLETE
28 T23102 SEALING RING IN 3-PARTS
29 T23103 Guide ring in 2-parts
30 T23119 OIL SCRAPER RING IN 2-PARTS, COMPLETE
31 T23125 Extension Spring for scraper ring
32 T23126 Extension Spring for Clamp
33 T23130 O-RING FOR HOUSING T23112
34 T23134 LOCKING PLATE FOR HOUSING  T23112
35 T23140 SET RING T23101,T23102,T23103
36 T23150 SET EXTENSION SPRING T23125,T23126
37 T27001 CYLINDER COVER WITH CCS CERT.
38 T27015 JOINT RING FOR CYLINDER COVER T27001
39 T27018 PROTECTION CAP FOR CYL. COVER T 27001
40 T27100 CYLINDER COVER COMPLETE
41 T27101 CYLINDER COVER BARE
42 T27210 SPINDLE FOR FUEL INJECTION VALVE
43 T27211 SPRING CARRIER FOR FUEL INJECTION VALVE
44 T27215 Sleeve for fuel injection valve
45 T27224 O-RING FOR HOUSING FOR FUEL INJECTION VALVE
46 T27225 O-RING FOR COLLAR NUT & VALVE BODY
47 T27227 O-RING FOR SPRING TENSIONER T27212
48 T27240 2P NOZZLE COMPLETE WCH 7751/02 X 107.228  687.200 X NO.9
49 T27242 NEEDLE SEAT AND NEEDLE
50 T27244 ATOMIZER FOR 2P-NOZZLE (0.780*0.720*0.740*0.640*0.680MM)
51 T27250 VALVE CONNECTION PIECE FOR FUEL INJECTION  VALVE
52 T27251 VALVE BODY FOR T27252
53 T27252 VALVE BODY FOR FUEL INJECTION VALVE
54 T27253 VALVE BODY FOR T27252
55 T27256 SCREW FOR FUEL INJECTION VALVE
56 T27258 COMPRESSION SPRING FOR VALVE BODY T27251
57 T27259 COMPRESSION SPRING FOR VALVE BODY T27253
58 T27416 SELF LOCKING NUT FOR VALVE SPINDLE T27403
59 T27418 JOINT RING FOR AIR STARTING AIR VALVE
60 T27421 O-RING FOR HOUSING
61 T27508 VALVE SEAT FOR EXHAUST VALVE
62 T27510 O-RING TO VALVE SEAT
63 T27516 O-RING TO BUSH T 27515
64 T27518 V/V SPRINDLE  W/ ROTATION  WING  TO EXHAUST VALVE
65 T27528 PISTON TO EXH VALVE
66 T27529 BUSH TO PISTON T 27528
67 T27530 PISTON TO EXH VALVE
68 T27541 JOINT RING TO VALVE SEAT T 27508
69 T27542 JOINT RING FOR COVER
70 T27543 PISTON JOINT RING TO PISTON T 27530
71 T27544 ROD JOINT RING TO GUIDE BUSH
72 T27545 PISTON RING TO PISTON T27528
73 T27560 O-RING TO T 27502 & T27508
74 T27561 O-RING TO VALVE  CAGE
75 T27562 O RING TO AIR CYL. HOUSING T27511
76 T27563 O RING TO BUSH T27529
77 T27564 O-RING TO PISTON T27530
78 T27720 INDICATOR VALVE COMPLETE
79 T33005 ELASTIC STUD FOR UPPER CON. ROD BEARING
80 T33012 LOCKING CAP FOR NUT
81 T33016 COMPRESSION SHIM FOR CONNECTING ROD
82 T33023 LOCKING PLATE FOR LOCKING CAP T33102
83 T33121 UPPER HALF CONNECTING ROD TOP END BEARING
84 T33150 BEARING SHELL FOR UPPER CON.ROD BEARING
85 T33400 CROSSHEAD-LUBRICATION LINKAGE COMPLETE
86 T33801 ELASTIC SCREW FOR PISTON ROD
87 T33802 LOCKING SEGMENT FOR SCREW T33801
88 T33805 LOCKING PLATE FOR LOCKING SEGMENT T33802
89 T34002 LOCKING SEGMENT FOR ELASTIC BOLT
90 T34022 LOCKING PLATE FOR PISTON
91 T34024 O-RING FOR BUSH T 34204
92 T34025 O-RING FOR PISTON ROD T34201
93 T34026 O-RING FOR PISTON ROD
94 T34101 PISTON CROWN
95 T34121 PISTON SKIRT
96 T34260 SET OF LOINTS AND LOCKING PLATES (T33805,T34022,T34024,T34025)
97 T34401 PISTON RING 380 X 10 X 13MM
98 T34402 PISTON RING 380 X 10 X 13MM
99 T36100 PISTON-COOLING LINCAGE, COMPLETE
100 T43120 Starting Air slide valve to starting air distributor
101 T43121 Bush for starting air slide valve
102 T43122 Slide valve for starting air slide valve
103 T43123 Pulley for starting air slide valve
104 T43124 Du-bush ( T43123~T43125)
105 T43126 Spring for starting air slide valve
106 T43135 Du-bush
107 T43145 Rod seal
108 T43146 Piston seal to piston
109 T43158 O-ring for starting air slide valve
110 T43159 O-ring for Cylinder
111 T43616 Piston sealing ring to piston T43607
112 T43655 Piston sealing ring to pre-control v/v
113 T43656 Piston sealing ring to pre-control v/v
114 T45529 O RING FOR FLANGE T45508
115 T45533 O RING FOR FLANGE T45508
116 T46038 AIR FILTER ELEMENT H=75.0 , O.D:39.5, I.D :20
117 T46038 AIR FILTER ELEMENT H=75.0 , O.D:39.5, I.D :20
118 T46038 AIR FILTER ELEMENT H=75.0 , O.D:39.5, I.D :20
119 T46040 relief valve for control air supply
120 T55204 PUMP COVER FOR HOUSING
121 T55228 SCREW PLUG FOR FUEL INJECTION PUMP
122 T55235 O RING FOR HOUSING T -55201
123 T55236 O RING FOR PUMP COVER  T -55204
124 T55238 O RING FOR SCREW PLUG T -55228
125 T55260 PISTON AND CYLINDER FOR FUEL INJECTOR PUMP
126 T55505 PUMP CYL. FOR HYDRAULIC ACTUATOR P/P
127 T55505 PUMP CYL. FOR HYDRAULIC ACTUATOR P/P
128 T55505 PUMP CYL. FOR HYDRAULIC ACTUATOR P/P
129 T55506 PISTON FOR HYDRAULIC ACTUATOR P/P
130 T55506 PISTON FOR HYDRAULIC ACTUATOR P/P
131 T55506 PISTON FOR HYDRAULIC ACTUATOR P/P
132 T55507 PISTON RING FOR PISTON T55506
133 T55529 O-RING FOR HOUSING T55501
134 T84433 O-RING FOR HYP. PIPING - T 844
135 T84500 SIGHT GLASS INDICATOR 8 POINTS COMPLETE
136 T87301 FUEL PRESSURE PIPE FOR FUEL INJECTOR VALVE L=1040MM
137 T87305 METALLIC HOSE FOR FUEL PRESSURE PIPE T87301
138 T87312 DIFFERENTIAL THREAD NUT FOR FUEL  PRESSURE PIPE
139 T87313 DIFFERENTIAL THREAD NUT FOR FUEL  PRESSURE PIPE
140 T87314 FLANGE FOR FUEL PRESSURE PIPE
141 T87319 O' RING FOR FLANGE  T 8314
142 T87326 FUEL PRESSURE PIPE FOR FUEL INJECTOR VALVE L=970MM
143 T87330 METALLIC HOSE FOR FUEL PRESSURE PIPE T87326
144 T87340 FUEL PRESSURE PIPE ( SHORT )
145 T87350 FUEL PRESSURE PIPE ( LONG )
146 T92033 REMOTE THERMOMETER FOR EXH.
147 10 O-RING TO PISTON SEAL ( 160 X 155 X3,8 )
148 10a SLIDE RING TO PISTON  SEAL (160 X155 X3,8)
149 11 O-RING TO ROD SEAL ( 90 X 94 X3,8 )
150 11a SLIDE RING TO ROD SEAL ( 90 X 94 X 3,8)
151 94935 HIGH PRESSURE HOSE OF HYDRAULIC JACK 94215 L=900MM
152 9-  94314 O-RING TO PISTON SEAL
153 9a- 94314 SLIDE RING 100 X 95 X 3,8
154 10- 94314 O-RING TO ROD SEAL
155 10a-94314 SLIDE RING 60 X 64 X 3,8
156 94272C CONNECTION NIPPLE WITH PRESSURE BOLT AND COMP. SPRING
  
SULZER RTA48 
1 T21270 O-RING FOR CYL LINER
2 T21271 O-RING FOR CYL LINER 
3 T21272 O-Ring for Cylinder
4 T21401 Cylinder Liner  (CCS Certificate)
5 T23101 SCRAPER RING IN 3 PARTS COMPLETE
6 T23102 SEALING RING IN 3 PARTS COMPLETE
7 T23103 GUIDE RING IN 2 PARTS ON GLAND BOX
8 T23107 CLAMP ON GLAND BOX(3PCS IN GLAND BOX)
9 T23119 OIL SCRAPER RING IN TWO PARTS COMPLETE WITH PIN
10 T23120 OIL SCRAPER RING IN TWO PARTS COMPLETE
11 T23125  EXTENSION SPRING FOR SCRAPER RING T 23101
12 T23126  EXTENSION SPRING FOR CLAMP T 23107
13 T23127 EXTENSION SPRING FOR OIL SCRAPER RINGS T23119 & T23120
14 T23130 O-RING FOR HOUSING GLAND BOX
15 T23134 LOCKING PLATE FOR HOUSING T 23112
16 T27015 JOINT RING FOR CYLINDER COVER
17 T27118 PROTECTION CUP FOR CYL.COVER(STUDBOLT)
18 T27208 DISC SPRING FOR FUEL INJ. VALVE
19 T27224 O-RING FOR HOUSING
20 T27225 O-RING FOR COLLER NUT
21 T27227 O-RING FOR SPRING TENSION T27212
22 T27240 Nozzle for fuel injection valve with shrunk in needle
23 T27242 NOZZLE ( 2 PIECE TYPE)
24 T27244 ATOMIZER
25 T27252 Valve Body for fuel injection valve
26 T27253 Valve body for T27252
27 T27258 Compression spring for valve body
28 T27259 Compression spring for valve body
29 T27411 PISTON SEALING RING
30 T27416 SELF LOCKING NUT FOR VALVE SPINDLE
31 T27418 JOINT RING
32 T27422 O-RING FOR COVER
33 T27508 VALVE SEAT TO EXHAUST VALVE 
34 T27510 O-RING TO VALVE SEAT T27508
35 T27518 VALVE SPINDLE WITH ROTATION WING TO EXHAUST VALVE
36 T27528 PISTON TO EXHAUST VALVE
37 T27529 BUSH PISTON T27528
38 T27530 PISTON TO EXHAUST VALVE
39 T27532 THRUST FLANGE TO PISTON T27530
40 T27533 SPLIT GROOVE TO PISTON T27530  
41 T27541 JOINT RING TO VALVE SEAT
42 T27542 JOINT RING TO COVER T27525
43 T27543 PISTON JOINT RING TO PISTON T27530
44 T27544 ROD JOINT RING TO GUIDE BUSH T27522
45 T27545 PISTON RING TO PISTON T27528
46 T27546 PROTECTION CUP TO EXH.VALVE (STUDBOLT)
47 T27560 O-RING TO T27502&T27508
48 T27561 O-RING TO VALVE CAGE T27502
49 T27710 O-RING FOR RELIEF VALVE
50 T27712 JOINT RING FOR VAVLE SEAT
51 T27724 JOINT RING FOR INDICATOR VALVE
52 T27725 SLEEVE FOR INDICATOR VALVE
53 T33801 SCREW FOR PISTON ROD T34201
54 T34025 O-RING FOR PISTON ROD T34201 
55 T34026 O-RING FOR PISTON ROD T34201
56 T34107 ELASTIC SCREW FOR PISTON 
57 T34205 DOWEL PIN FOR PISTON ROD T34201
58 T34401 PISTON RING (NO 1+2RING) 480x15x16mm
59 T43158 O-RING FOR STARTING AIR SLIDE VALVE
60 T55220 SEALING FOR COVER T55219
61 T55235 O-RING FOR HOUSING T55201
62 T55236 O-RING FOR PUMP COVER T55204
63 T55241 SHAFT SEAL FOR RACK T55206
64 T64670 VALVE GROUP COMPLETE
65 T64674 VALVE PLATE FOR SCAVENG VALVE
66 T84433 O-RING FOR HYDRAULIC PIPE
67 T87301 FUEL PRESSURE PIPE FOR FUEL INJ.VALVE
68 T87305 METALLIC HOSE FOR FUEL INJECTION PIPE
69 T87312 DIFFERENTIAL THREAD NUT FOR FUEL PRESSURE PIPES
70 T87313 DIFFERENTIAL THREAD NUT FOR FUEL PRESSURE PIPES
71 T87318 O-RING FOR METALLIC HOSE T87305
72 T87319 O-RING FOR FLANGE FUEL PRES.PIPE
73 T87326 FUEL PRESSURE PIPE FOR FUEL INJ. VALVE
74 T87330 METALLIC HOSE FOR FUEL INJECTION PIPE
  
SULZER RTA58 
1 U11366 BEARING HALF SHELL FOR MAIN BEARING
2 U11376 BEARING HALF SHELL FOR MAIN BEARING DRIVING END
3 U21101 CYLINDER JACKET WITH ALLEN SCREW BOLT BOLT
4 U21111 WATER GUIDE RING FOR CYLINDER JACKET
5 U21112 ROUND RUBBER RING FOR U-21111
6 U21300 WATER  GUIDE  JACKET  FOR  CYLINDER  LINER  DRG: 107.254.646
7 U21300 WATER  GUIDE  JACKET  FOR  CYLINDER  LINER  DRG: 107.203.400
8 U21401 CYLINDER LINER
9 U21406 FILLING PIECE ON CYLINDER LINER
10 U21407 JOINT FOR FILLING PIECE U21406
11 U21410 JOINT RING ON CYLINDER LINER
12 U21411 RUBBER RING FOR WATER GUIDE JACKET
13 U21412 RUBBER RING FOR CYLINDER LINER 
14 U21500 LUBRICATING QUILL WITH ACCUMULATOR COMPLETE
15 U21505 Diaphragm for accumulator
16 U21524 JOINT RING
17 U23101 SCRAPER RING, IN THREE PARTS COMPLETE
18 U23102 SEALING  RING IN THREE PARTS COMPLETE
19 U23103 GUIDE RING ON GLAND BOX
20 U23104 LOWER HOUSING
21 U23113 OIL SCRAPER RING IN 3-PARTS COMPL.
22 U23114 OIL SCRAPER RING IN 3-PARTS COMPL. WITH PIN
23 U23119 OIL SCRAPER RING COMPLETE
24 U23120 JOINT RING COMPLETE
25 U23121 DISTANCE RING FOR GLAND BOX
26 U23123 EXTENSION SPRING FOR U 23113
27 U23125 EXTENSION SPRING FOR SCRAPER RING
28 U23126 EXTENSION SPRING FOR CLAMP RING U23107
29 U23127 EXTENSION SPRING FOR OIL SCRAPER RING
30 U23128 O-RING FOR UPPER HOUSING U23112
31 U23129 ROUND RUBBER RING FOR RING HOLDER
32 U23130 O-RING FOR LOWER HOUSING
33 U27101 CYLINDER COVER DRAWING NO.: 0-107.201.062
34 U27105 SLEEVE FOR CYLINDER COVER
35 U27107 Clamp on gland box (3/pcs per gland box)
36 U27116 ROUND RUBBER RING FOR CYL COVER
37 U27205 WASHER  FOR  FUEL  INJECTION  VALVE 
38 U27206 DOWEL PIN FOR NOZZLE HOLDER
39 U27208 DISC SPRING FOR FUEL INJECTION VALVE
40 U27210 SPINDLE FOR FUEL INJECTION VALVE
41 U27211 SPRING CARRIER FOR FUEL INJ.VALVE
42 U27215 CIRCULATION VALVE FOR FUEL INJECTION VALVE U27216-U27220
43 U27216 NEEDLE SEAT NEEDLE FOR CIRCULATION VALVE
44 U27220 COMPRESSION SPRING
45 U27221 COMPRESSION SPRING
46 U27223 SLEEVE FOR TWO PIECE - NOZZLE
47 U27224 O-RING FOR NOZZLE HOLDER
48 U27225 O-RING FOR SPRING TENSIONER
49 U27226 O-RING FOR CIRCULATION VALVE
50 U27227 DOWEL PIN
51 U27228 DOWEL PIN FOR NOZZLE BODY U 27240
52 U27240 NOZZLE COMPLETE 0.775/0.750/0.725/0.650/0.700R
53 U27240 NOZZLE COMPLETE 0.925X0.925X0.675X0,675XRX0.9
54 U27241 NOZZLE TIP
55 U27242 NOZZLE WITH NEEDLE / TWO PIECE- NOZZLE
56 U27244 ATOMIZER FOR FUEL INJECTION VALVE, 2-PIECE NOZZLE 295.400X205
57 U27244 Atomizer ( two piece-nozzle ) 295.400 x 205
58 U27252 NOZZLE SLEEVE
59 U27407 BUSH FOR STARTING AIR VALVE
60 U27408 VALVE SPINDLE
61 U27413 SPINDLE GUIDE FOR STARTING AIR VALVE
62 U27414 VALVE SEAT
63 U27424 PISTON RING FOR STARTING AIR VALVE
64 U27425 PISTON RING FOR STARTING AIR VALVE
65 U27426 PISTON RING FOR STARTING AIR VALVE
66 U27427 ROD SEAL FOR BUSH U27404
67 U27429 O-RING FOR BUSH HOISING
68 U27430 O-RING FOR BUSH U27407
69 U27431 JOINT RING FOR VALVE SEAT
70 U27459 O-RING
71 U27508 VALVE SEAT  TO VALVE CAGE U 27502
72 U27510 O-RING FOR VALVE SEAT
73 U27514 UPPER HOUSING TOEXHAUST VALVE
74 U27517 HOUSING FOR VALVE DRIVE
75 U27518 EXHAUST VALVE SPINDLE WITH ROTATING RING
76 U27522 GUIDE BUSH FOR VALVE SPINDEL
77 U27523 RETAINING RING FOR EXHAUST VALVE
78 U27524 CYLINDER FOR EXHAUST VALVE
79 U27525 DISTANCE SLEEVE FOR EXHAUST VALVE
80 U27526 NUT FOR VALVE SPINDLE U 27518
81 U27528 SLEEVE FOR EXHAUST VALVE(PC)
82 U27529 BUSH FOR EXHAUST VALVE(PC)
83 U27530 RETAINING RING FOR BUSH U 27529
84 U27532 PISTON FOR VALVE DRIVE
85 U27533 DAMPING ELEMENT FOR VALVE DRIVE
86 U27535 LOCKING RING TWO PARTS FOR VALVE SPINDLE
87 U27538 SEALING AIR THROTTLE, COMP. FOR EXH. VALVE
88 U27539 JOINT RING FOR SEALING AIR THROTTLE
89 U27540 O-RING FOR EXH VALVE CAGE AND VALVE SEAT
90 U27542 COVER FOR UPPER HOISING U27514
91 U27543 JOINT FOR COVER U27542 
92 U27544 SIGHT GLASS FOR UPPER HOISING
93 U27546 PISTON RING, WITH GASTISHT FOR PISTON U27511
94 U27547 PISTON RING,  FOR AIR CYLINDER JOINT HOUSING
95 U27548 ROD JOINT RING FOR VALVE SPINDLE U 27518
96 U27549 O-RING FOR VALVE SEAT AND VALVE CAGE
97 U27550 O RING FOR U27511 AND U27514
98 U27551 O-RING FOR VALVE CAGE
99 U27552 O-RING FOR BUSH U 27529
100 U27554 O-RING FOR HOUSTING U 27537
101 U27555 JOINT RING FOR VLV SEAT
102 U27558 COARSE FILTER FOR U 27556
103 U27559 JOINT RING FOR U 27557
104 U27560 JOINT RING FOR SCREW PLUG U 27579
105 U27561 JOINT RING FOR SCREW PLUG U27580
106 U27563 DISC SPING FOR RETAINING RING U 27523
107 U27564 TNEDION SPRING FOR LOCKING RING U27535
108 U27565 SHIM RING FOR DAMPING ELEMENT U 27533
109 U27578 SCREW FOR VALVE SPINDLE 
110 U27579 SCREW PLUG FOR VENT HOUSING U 27556
111 U27580 SCREW PLUG FOR HOUSING U 27517
112 U27584 LOCKING PLATE, FOR BOLT 16 mm
113 U27585 LOCKING PLATE FOR U 27578
114 U27586 LOCKIG PLATE FOR SCREW U27578
115 U27700 RELIEF VALVE COMPLETE
116 U27702 VALVE SEAT FOR RELIEF VALVE
117 U27703 valve body for relief valve
118 U27706 spring carrier for relief valve
119 U27707 COMPRESSION SPRING FOR RELIEF VALVE
120 U27710 O-RING FOR RELIEF VALVE 
121 U27712 JOINT FOR VALVE SEAT
122 U27720 INDICATOR VALVE COMPLETE
123 U27721 INDICATOR VALVE
124 U34002 NUT FOR ELASTIC SYUD 
125 U34003 LOCKING DISC FOR NUT U34002
126 U34004 LOCKING DISC FOR NUT U34231
127 U34005 Connection Piece outlet
128 U34006 Connection Piece outlet
129 U34010 Flange for running pipe
130 U34012 Locking plate
131 U34013 LOCKING PLATE FOR LOCKING DISC U34003
132 U34014 O-RING FOR U34005 & U34006  
133 U34015 O-RING FOR RUNNING PIPE U34230
134 U34016 ROUND RUBBER RING FOR PISTON SKIRT 
135 U34017 ROUND RUBBER BETWEEN PISTON HEAD & SKIRT
136 U34101 Piston Head, Drawing No:0-107.201.514
137 U34107 ELASTIC  STUD  ON  PISTON  
138 U34108 LOCATING SCREW FOR ELASTIC STUD
139 U34121 PISTON SKIRT COMPLETE (U34122-U34123)
140 U34122 PISTON SKIRT   
141 U34123 RUBBING RING FOR PISTON SKIRT
142 U34210 PISTON ROD NUT FOR  LONG PISTON ROD
143 U34230 RUNNING PIPE FOR PISTON
144 U34231 NUT
145 U34401 PISTON RING    
146 U34402 PISTON RING  2-ND-STH RING
147 U34405 PISTON RING
148 H34401 Piston Ring
149 H34402 Piston Ring
150 U36111 O-RING FOR CHEST
151 U36162 INLET NOZZLE FOR STAND PIPE        
152 U36163 GUIDE BUSH FOR STAND PIPE INLET AND OUTLET
153 U36170 LOCKING PLATE  FOR STAND PIPE
154 U36171 UPPER O RING FOR STAND PIPE
155 U36172 LOWER O RING FOR STAND PIPE
156 U36176 OUTLET NOZZLE ON STAND PIPE U36175 
157 U36203 SCRAPER RING ON GLAND BOX
158 U36204 GUIDE RING  ON GLAND BOX
159 U36205 JOUNT RING IN 3- PARTS O0N GLAND BOX
160 U36206 SCRAPER RING IN 3- PARTS, COMPLETE
161 U36207 clamp in gland box ( 3pieces per gland box)
162 U36208 ROD SEAL RING
163 U36209 JOINT RING FOR RING HOLDER U 36201
164 U36210 TENSION SPRING FOR SCREPER RING U36206   
165 U36211 TENSION SPRING FOR GUIDE RING U36204 
166 U36216 O- RING FOR RING HOLDE5R U 36201
167 U42129 BUSH FOR SLEEVE  U 42125
168 U42189  CAM  FOR FUEL PUMP
169 U42190 CAM FOR HYDRAULIC ACTUATOR PUMP 125
170 U43120 STRAIGHT CUT OFF VALVE COMPLETE
171 U43122 PISTON FOR CUT OFF VALVE
172 U43124 PISTON SEALING RING FOR PISTON U43122
173 U43125 PISTON SEALING RING FOR PISTON U43122
174 U43126 O-RING FOR HOUSING U43123
175 U43141 Control Valve for Starting control Valve
176 U43188 O-RING FOR U43120
177 U43349 O-RING FOR U43320
178 U43622 COMPRESSION SPRING
179 U43635 JOINT RING FOR U43600 & U43700
180 U43636 O-RING FOR HOUSIONG
181 U43638 O-RING FOR COVER U43606
182 U43641 PISTON JOINT RING FOR VALVE
183 U43642 ROD SEALING FOR FLANGE
184 U43658 JOINT RING FOR SCREW PLUG
185 U43659 JOINT RING FOR SCREW PLUG
186 U43666 JOINT RING FOR CONTROL VALVE
187 U43674 RUBBER RING FOR 3/2 CONTRAL VALVE
188 U43688 O-RING FOR VALVE
189 U43734 O-RING FOR BUSH U43768
190 U43735 O-RING FOR COVERS
191 U43737 O-RING FOR COVER
192 U43738 O-RING FOR BUSH
193 U43739 ROD SEALING RING FOR PISTON
194 U43740 ROD SEALING RING FOR PISTON
195 U45100 REVERSING VALVE, COMPLETE
196 U45120 OIL SEAL
197 U45121 BALL BEARING
198 U45138 O-RING FOR COVER U45103
199 U45139 O-RING FOR VALVE PLATE U45108
200 U46002 PRESSURE REDUCER FOR CONTROL AIR
201 U46003 PRESSURE REDUCER FOR CONTROL AIR
202 U46006 AIR FILTER FOR CONTROL SUPPLY
203 U55260 PLUNGER WITH BUSH COMPL
204 U55420 ROLLER GUIDE FOR FUEL & HYDRAULIC ACTUATOR
205 U55421 ROLLER GUIDE
206 U55422 ROLLER FOR ROLLER GUIDE U55475
207 U55423 BUSH FOR ROLLER GUIDES U55420 & U55475
208 U55424 PIN FOR ROLLER GUIDES U55420 & U55475
209 U55425 INSERT FOR PIN U55424
210 U55426 THRUST WASHER FOR ROLLER GUIDES U55420 & U 55475
211 U55427 RETAINING BUSH FOR ROLLER GUIDE U 55421
212 U55429 THRUST PIECE FOR ROLLER GUIDE U55421
213 U55434 LOCKING PLATE FOR U 55421 & U 55482
214 U55435 CIRCLIP TYPE A FOR INSERT U55425
215 U55462 PRESSING NIPPLE FOR GUIDE BUSH PLUNGER
216 U55475 ROLLER GUIDE COMPLETE
217 U55476 ROLLER GUIDE
218 U55502 Bush for actuator housing U55501
219 U55503 Piston for Actuator Pump
220 U55504 Piston Ring for Actuator Pump
221 U55505 Non-return Valve for Actuator Pump
222 U55511 Relief Valve for Actuator Pump
223 U55555 ROTIONAL SAFETY STUD FOR ROLLER GUIDES
224 U55562 COMPRESSION SPRING FOR PLUNGER
225 U55801 SPILL V/V WITH SEAT CMPL
226 U55805 SUCTION OR DELIVERY V/V WITH SEAT CMPL
227 U55808 RELIEF VALVE COMPL. FOR FUEL INJECTION PUMP (U55809-U55819)
228 U55811 VALVE NEEDLE FOR RELIEF VALVE
229 U55812 SPRING CARRIER FOR RELIEF VALVE
230 U55815 DISC SPRING FOR RELIEF VALVE
231 U55816 SEATING WASHER FOR RELIEF VALVE
232 U55817 SNAP RING FOR RELIEF VALVE
233 U55819 O-RING FOR RELIEF VALVE HOUSING
234 U55822 Indicator for relief valve
235 U55825 O-RING FOR HOUSING U55823
236 U55830 PRESSURE BUSH FOR SUCT / SPILL VALVES
237 U55831 PRESSURE BUSH FOR DELIVERY VALVE
238 U55833 TAPPET WITH GUIDE BUSH & SPRING
239 U55835 Compression Spring for Push Rod U55832
240 U55837 CAP FOR V/V
241 U55838 PIN FOR DELIVERY VALVES
242 U55839 PIN FOR SUCTION AND SPILL VALVES
243 U55841 COMPRESSION SPRING FOR SUCTION & SPILL V/V
244 U55842 COMPRESSION SPRING FOR DELIVERY V/V
245 U55844 NECKED DOWN BOLT FOR U 55837
246 U55850 CONNECTION PIECE FOR U- 55700 & U 55800
247 U55852 DOUBLE NIPPLE FOR U 55700 & U 55800
248 U55856 GASKET FOR DOUBLE NIPPLE U 55852
249 U55961 COVER FOR FUEL INJECTION PUMP
250 U58017 Roller for positioning handle U 58016
251 U58018 DU bush for lever U 58010
252 U58057 Pin for levers U58054,U58076 and U58081
253 U58102 Spherical rod end, right hand thread
254 U58103 Spherical rod end, left hand thread
255 U58200 Lever for intermediate regulating shaft
256 U58237 DU bush for cover U 58236
257 U58244 DU bush for piston U 58243
258 U58259 O-RING FOR COVER AND INTERMEDIATE
259 U58261 ROD JOINT RING FOR COVER U58240
260 U58262 ROD JOINT RING FOR INTERMEDIATE PIECE U58241
261 U58265 Lever for intermediate regulating shaft
262 U58280 Pin for lever U 58265
263 U64670 VALVE GROUP, COMPLETE
264 U64674 V/V GROUP CMPL (27 V/V)
265 U67301 ARRANGEMENT OF TURBOCHARGER WATER SEPARATOR-PACK,COMPLETE
266 U87041 Fuel Pressure Pipe Complete
267 U87042 Fuel Pressure Pipe Complete
268 U87044 Fuel pressure pipe,complete
269 U87045 FUEL PRESSURE PIPE,COMPLETE
270 U87046 FUEL PRESSURE PIPE,COMPLETE
271 U87048 Coupling piece for fuel pressure pipe
272 U87056 Coupling piece for fuel pressure pipe
273 U87082 HIGH  PRESSURE  PIPE  FOR  FUEL  OIL  WITH  COUPLINGS
274 U87087 FUEL PRESSURE PIPE,FOR FUEL INJECTION V/V
275 U87092 FUEL PRESSURE PIPE,FOR FUEL INJECTION V/V
276 U87516 GUIDE TUBE FOR METALLIC HOSE
277 U87520 O-RING FOR METALLIC HOSE
278 U87521 O-RING FOR FUEL PRESSURE PIPE
279 U87706 Spindle for pressure retaining valve
280 U87711 Handle wheel for pressure retaining valve
281 U87721 Stop Pin on pressure retaining valve
282 U87723 Stop Disc for pressure retaining valve
283 U87725 Compression Spring for Stop pin U87721
284 U87751 FUEL SHUT OFF VALVE
285 U87752 Housing for Fuel shut off cock
286 U87753 Valve Spindle for Fuel shut off cock
287 U87754 Nipple on fuel shut off cock
288 U87757 JOINT ON NIPPLE
289 U87758 O-RING FOR VALV ESPINDLE
290 U87759 Spindle Head for Fuel shut off cock
291 U92040 REMOTE THERMOMETER WITH CAPILLARY TUBE COMPLETE 600"C
292 U94252 CAGE (SET OF SEATING) RINGS
293 U94425 CONNECTING PIECE
294 8 OIL PUMP 70 MPa, CODE NO. 94931
295 13 OIL DISTRIBUTOR, CODE NO. 94934
296 15 PRESSURE GAUGE(0-100 MPa WITH CONNECTION SOCKET), CODE 94932
297 17 CONNECTION PIECE
298 18 COUPLING SLEEVE
299 19 COUPLER PLUG
300 20 HIGH PRESSURE HOSE(1800 MM LONG), CODE NO. 94935
301 21 HIGH PRESSURE HOSE (600 MM LONG), CODE NO. 94935
302 94123 SPECIAL FEELER GUAGE
303 94215 TENSION DEVICE FOR CYL.HEAD STUDS
304 94215 TENSIONING DEVICE FOR TIGHTENING CYLINDER COVER STUDS
305 94252 HYDRAULIC TOOLS FOR EXHAUT VALVE
306 94275 HIGH PRESSURE HOSE (1500KG/CM2, 1.4m )
307 94305 DIA GUAGE FOR MEASURING CRANKSHAFT DEFLECTION
308 10A RUBBER RING. F ROD SEALING 55 x 59 x 3.8
309 10B SLIDE RING. F ROD SEALING
310 12A RUBBER RING. F ROD SEALING 120 x 125 x 3.8
311 12B SLIDE RING F ROD SEALING 120 x 125 x 3.8
312 13A RUBBER RING. F PISTON SEALING 210 x 204 x 5.8
313 13B SLIDE RING. F PISTON SEALING 210 x 204 x 5.8
314 22A RUBBER RING. F.ROD SEALING.60 x 64 x 3.8
315 22B SLIDE RING. F ROD SEALING 60 x 64 x 3.8
316 23A RUBBER RING. F PISTON SEALING 100 x 95 x 3.8
317 23B SLIDE RING. F PISTON SEALING100 x 95 x 3.8
318 94215-11.1 O RING FOR PISTON SEALING RING 190x184x5.8
319 94215-11.2 LEVER COLLAR FOR PISTON SEALING RING 190x184x5.8
320 94215-11.3 O RING FOR ROD SEALING RING 100x105x3.8
321 94215-11.4 LEVER COLALR FOR ROD SEALING RING 100x105x3.8
322 94215-11A RUBBER RING. F ROD SEALING 100 x 105 x 3.8
323 94215-11B SLIDE RING. F ROD SEALING 100 x 105 x 3.8
324 94215-12A RUBBER RING. F PISTON SEALING. 190 x 184 x 5.8
325 94215-12B SLIDE RING. F PISTON SEALING 190 x 184 x 5.8
326 94215-17 High Pressure hose
327 94215-18 Connecting plug
328 94215-19 Distribution piece 
329 94215-20 Connecting piece
330 94215-4   Coupling sleeve  
331 94215-6  Vent screw                            
332 94215-8 Belleville spring washer
333 94251-2.1 O RING FOR PISTON SEALING RING 100x95x3.8
334 94251-2.2 LEVER COLLAR FOR PISTON SEALING RING 100x95x3.8
335 94251-2.3 O RING FOR ROD SEALING RING 55x59x3.8
336 94251-2.4 LEVER COLLAR FOR ROD SEALING RING 55x59x3.8
337 94251-6 CLUTCH SLEEVE
338 94251-9 VENT SCREW
339 94252-2.1 O RING FOR PISTON SEALING RING 210x204x5.8
340 94252-2.2 LEVEL COLLAR FOR PISTON SEALING RING 210x204x5.8
341 94252-2.3 O RING FOR ROD SEALING RING 120x125x3.8
342 94252-2.4 LEVEL COLLAR FOR ROD SEALING RING 120x125x3.8
343 94274c Testing device for the circulating valve
344 94935-a HIGH PRESSURE HOSE (700KG/CM2)
345  AIR HYDRAULIC PUMP 1500KG/CM2
346  HIGH PRESSURE HOSES & CONNECTORS HYDRAULIC PUMP (L=1.8 METERS)
347  DIA GUAGE FOR CRANKSHAFT DEFLECTION
  
SULZER RTA52(U) 
1 94552 Device for measuring the stroke of the fuel injection pump plunger X=540mm
2 94554 Device for measuring the stroke of suction and spill valves in fule pump X=330mm
3 94555 Spanners for setting suction and spill valve X=250mm;AF=27mm;
4 94557 Spanners for setting suction and spill valve X=205mm; AF=22mm;
5 Z11366 Bearing shell for main bearing
6 Z11914 Piston sealing ring for piston
7 Z11924 O-ring for lower intermediate ring
8 Z21158 Relief valve complete
9 Z21190 Round rubber ring seamless
10 Z21410 JOINT RING ON CYLINDER LINER
11 Z21411 ROUND RUBBER RING FOR WATER GUIDE JACKET
12 Z21412 ROUND RUBBER RING FOR CYLINDER LINER 
13 Z21500 LUBRICATING QUILL WITH ACCUM. COMPLETE
14 Z21524 JOINT RING FOR LUBRICATING QUILL
15 Z21526 BUSH
16 Z21530 O-RING
17 Z21532 JOINT RING
18 Z23101 SCRAPER RING IN 3-PARTS FOR GLAND BOX
19 Z23102 JOINT RING IN 3 PARTS FOR GLAND BOX
20 Z23103 GUIDE RING IN 2 PARTS FOR GLAND BOX
21 Z23112 Guide ring in 2-parts with pin
22 Z23119 OIL SCRAPER RING IN 2-PARTS WITH PIN
23 Z23120 OIL SCRAPER RING IN 2-PARTS
24 Z23125 TENSION SPRING
25 Z23126 TENSION SPRING
26 Z23128 RUBBER RING
27 Z23140 SET SCRAPER RING FOR GLAND BOX (Z23101,Z23119,Z23120)
28 Z23145 SET RUBBER RING & LOCKING PLATE FOR GLAND BOX (Z23128, Z23131)
29 Z23150 SET EXTENSION SPRING FOR GLAND BOX (Z23125,Z23126)
30 Z27100 Cylinder Cover
31 Z27116 RUBBER RING FOR CYLINDER COVER
32 Z27215 Circulation valve for fuel injection valve
33 Z27221 Compression spring for fuel injection valve
34 Z27222 CYLINDRICAL SCREW TO FUEL INJECTION VALVE;
35 Z27223 SLEEVE FOR TWO PIECE-NOZZLE;
36 Z27224 O-RING FOR NOZZLE HOLDER-Z27201;
37 Z27225 O-RING FOR SPRING TENSIONER
38 Z27226 O-RING FOR CIRCULATION VALVE
39 Z27242 NOZZLE WITH NEEDLE FOR FUEL INJECTION VALVE
40 Z27244 ATOMIZER FOR FUEL INJ. VALVE (TWO PIECE NOZZLE)
41 Z27255 SET O RING FOR FUEL INJECTION VALVE ( Z27224 :Z27225:Z27226)
42 Z27408 VALVE SPINDLE FOR STARTING AIR VALVE
43 Z27424 PISTON RING FOR STARTING AIR VALVE
44 Z27425 PISTON RING FOR STARTING AIR VALVE
45 Z27426 Piston ring for starting air valve
46 Z27429 O-RING FOR HOUSING Z27401
47 Z27509 VALVE SEAT FOR VALVE CAGE Z27501
48 Z27510 O-RING FOR VALVE CAGE Z27501
49 Z27522 DISTANCE RING FOR GUIDE BUSH Z27511
50 Z27524 O-RING FOR GUIDE BUSH
51 Z27542 PISTON RING WITH GASTIGHT SNAP FOR PISTON
52 Z27550 PISTON JOINT RING FOR PISTON
53 Z27551 ROD JOINT RING FOR DISTANCE RING
54 Z27553 O RING FOR VALVE SEAT Z27509
55 Z27554 O RING FOR VALVE CAGE Z27502
56 Z27555 O RING FOR UPPER HOUSING
57 Z27556 O RING FOR PISTON Z27516
58 Z27557 O RING FOR BUSH Z27527
59 Z27558 JOINT RING EXHAUST VALVE SEAT
60 Z27565 O RING FOR VALVE CAGE Z27502
61 Z27600 VALVE SPINDLE WITH ROTATION WING
62 Z27660 Set of o-ring and joint
63 Z27670 Set of o-ring and tap washer
64 Z27700 Relief valve complete
65 Z27710 JOINT FOR RELIEF VALVE
66 Z27712 JOINT FOR VALVE SEAT
67 Z27720 INDICATOR VALVE COMPLETE
68 Z33000 Connecting rod bearing
69 Z33120 Upper bearing half for connecting rod
70 Z33150 Bearing shell for upp end bearing
71 Z33200 lower bearing half for bottom end
72 Z33220 Bearing shell for bottom end bearing
73 Z34010 ELASTIC SCREW FOR PISTON
74 Z34027 O RING FOR PISTON ROD Z34006
75 Z34260 Set tap washer and o-ring
76 Z34401 PISTON RING 520x12x17MM
77 Z34402 PISTON RING 520x15x17MM
78 Z34403 PISTON RING
79 Z42185 CAM FOR FUEL PUMP
80 Z55260 PLUNGER WITH BUSH AND SPRING CARRIER COMPLETE
81 Z55421 ROLLER GUIDE FOR Z 55420
82 Z55425 ROLLER FOR ROLLER GUIDES Z 55420 AND Z 55435
83 Z55426 PIN FOR ROLLER GUIDES Z 55420 AND Z 55435
84 Z55428 BUSH FOR ROLLER GUEIDES  Z 55420 AND Z 55435
85 Z55429 THRUST WASKER FOR ROLLER GUIDES Z 55420 AND Z 55435
86 Z55432 CIRCLIP FOR ROLLER Z 55425
87 Z55462 NIPPLE FOR GUIDE BUSH FOR PLUNGER
88 Z55562 COMPRESSION SPRING FOR PLUNGER Z55260
89 Z55801 SPILLVALVE WITH SEAT; COMPLETE FOR FUEL INJECTION PUMP;
90 Z55805 SUCTION OR DELIVERY VALVE WITH SEAT;COMPLETE
91 Z55808 RELIEF VALVE , COMPLETE FOR FUEL INJECTION PUMP ( Z55808-Z55819)
92 Z55819 O-RING FOR RELIEF VALVE
93 Z55824 Push rod with guide bush and spring complete
94 Z55831 COMPRESSION SPRING FOR SUCTION ABS SPILL VALVE
95 Z55832 COMPRESSION SPRING FOR DELIVERY VALVE
96 Z55836 PIN FOR SUCTION AND SPILL VALVES (FOR FUEL INJECTION PUMP);
97 Z64670 VALVE GROUP, COMPLETE
98 Z64671 FRONT PIECE FOR VALVE GROUP
99 Z64672 MIDDLE PIECE FOR VALVE GROUP
100 Z64673 END PIECE FOR VALVE GROUP
101 Z64674 VALVE PLATE FOR VALVE GROUP
102 Z64675 Screw with nut complete
103 Z72110 SIGHT GLASS INDICATOR INDUCTIVE, COMPLETE
104 Z72123 SIGHT GLASS WITH SQUARE SECTION JOINT RING AND BALL T27211
105 Z72124 NIPPLE FOR Z27211
106 Z72125 SQUARE SECTION JOINT RING FOR Z27211
107 Z72155 HYD MOTOR FOR CYLINDER LUBRICATING PUMP
108 Z81385 EXPANSION PIECE BEFORE TURBOCHARGER
109 Z84350 PRE-LUBRICATING VALVE COMPLETE
110 Z84459 Joint ring for hydraulic piping
111 Z84460 Joint ring for hydraulic piping
112 Z84486 CYLINDER SCREW
113 Z84491 O-RING
114 Z84492 O-ring for joint ring Z84459 & Z84460
115 Z84493 O-RING
116 Z87048 FUEL PRESSURE PIPE FOR FUEL INJECTION VALVE
117 Z87055 FUEL PRESSURE PIPE FOR FUEL INJECTION VALVE
118 Z87067S COUPLING PIECE
119 Z87075 Connection Piece for Z87048 & Z87055
120 Z87076 Connection piece for fuel pressure pipe
121 Z87077 Coupling nut for Z87048 & Z87055
122 Z87078 Coupling nut for Z87048 & Z87055
123 Z87080 O-ring for Z87076
124 Z87081 Eo-coupling nut for metallic hose
125 Z87082 Eo-cutting ring for Z87081
126 Z87145 BARREL NIPPLE
127 Z87626 Metallic Hose for Z97048
128 Z87631 Metallic Hose for Z97055
129 Z87651S O RING
130 Z87652S COUPLING NUT
131 Z87653S COUPLING PIECE
132 Z87654S COUPLING NUT
133 Z87754 NIPPLE
134 Z87757 JOINT RING FOR Z87754
135 Z87758 O-RING FOR Z87754
136 Z87759 SPINDLE HEAD
137 Z92028 REMOTE THERMOMETER WITH CAPILLARY TUBE COMPL.
138  CRANK SHAFT DEFLECTION CONTROL GAUGE WITH CASE;
139  Thermometer for Exh.Gas 650C
  
  
SULZER RTA62(U) 
1 94215 HYDRAULIC JACK FOR CYL. COVER
2 Z17115 JOINT FOR CRANKCASE DOOR Z27100
3 Z21155 JOINT FOR COVER Z21150
4 Z21303 CYLINDRICAL SCREW  
5 Z21401 CYLINDER LINER NEW WITH CCS CERT DRAWING NO.:0-107.237.568
6 Z21410 JOINT RING FOR CYLINDER LINER
7 Z21411 ROUND RUBBER RING FOR WATER GUIDE JACKET
8 Z21412 ROUND RUBBER RING FOR CYLINDER LINER
9 Z21425 JOINT RING         
10 Z21526 BUSH
11 Z21530 O-RING
12 Z21532 JOINT
13 Z23101 SCRAPER RING IN 3 PARTS FOR GLAND
14 Z23102 JOINT RING IN 3-PARTS FOR CLAND BOX
15 Z23119 OIL SCRAPER RING IN 2-PARTS WITH PIN
16 Z23120 OIL SCRAPER RING IN 2 PARTS
17 Z23125 EXTENSION SPRING
18 Z23126 EXTENSION SPRING
19 Z23128 O-RING FOR Z 23105  
20 Z23140 SCRAPER RINGS FOR GLAND BOX
21 Z23150 EXTENSION SPRINGS FOR GLAND BOX
22 Z27101 CYLINDER COVER, BARE
23 Z27105 SLEEVE
24 Z27116 ROUND RUBBER RING FOR CYLINDER COVER
25 Z27200 FUEL INJECTION VALVE COMPELTE
26 Z27214 COLLAR NUT
27 Z27215 CIRCULATION VALVE FOR FUEL INJ. VALVE
28 Z27221 COMPRESSION SPRING
29 Z27223 SLEEVE FOR TWO PIECE NOZZLE
30 Z27224 O-RING FOR NOZZLE HOLDER
31 Z27225 O-RING FOR SPRING TENSIONER Z27212
32 Z27226 O-RING FOR CIRCULATION VALVE
33 Z27227 DOWEL PIN
34 Z27240 NOZZLE COMPLETE
35 Z27242 NOZZLE WITH NEEDLE FOR 2-PIECE  NOZZLE (194 X 96 -11382 12)
36 Z27244 ATOMIZER FOR FUEL INJECTION VALVE 2PIECES
37 Z27400 STARTING AIR VALVE COMPLETE
38 Z27406 O-RING FOR AIR STARTING VALVE
39 Z27408 VALVE SPINDLE 
40 Z27409 PISTON FOR STARTING AIR VALVE
41 Z27413 SPINDLE GUIDE FOR STARTING AIR VALVE
42 Z27424 PISTON RING FOR STARTING AIR VALVE
43 Z27425 PISTON RING FOR STARTING AIR VALVE
44 Z27426 PISTON RING FOR STARTING AIR VALVE
45 Z27429 O-RING FOR HOUSING
46 Z27431 JOINT RING FOR VALVE SEAT
47 Z27502 VALVE CAGE
48 Z27505 Square joint for Z 27504
49 Z27509 VALVE SEAT FOR VALVE CAGE Z27501
50 Z27510 O-RING FOR VALVE CAGE
51 Z27513 LOCKING PLATE FOR GUIDE BUSH
52 Z27515 AIR CYLINDER HOUSING FOR EXHASUT VALVE
53 Z27519 O-RING FOR AIR CYLINDER HOUSING
54 Z27522 DISTANCE RING FOR GUIDE BUSH
55 Z27527 BUSH FOR UPPER HOUSING
56 Z27542 PISTON RING WITH GASTIGHT SNAP
57 Z27544 JOINT RING FOR SIGHT GLASS
58 Z27545 SIGHT GLASS FOR VALVE DRIVE
59 Z27550 PISTON JOINT RING FOR Z 27516 
60 Z27551 ROD JOINT RING FOR GUIDE BUSH
61 Z27552 DISTANCE RING FOR GUIDE BUSH
62 Z27554 O-RING FOR VALVE CAGE
63 Z27554 O-ring for Z 27502 and Z 27509
64 Z27555 O-RING FOR UPPER HOUSING
65 Z27556 O-RING FOR PISTON
66 Z27557 O-RING FOR BUSH
67 Z27558 JOINT RING FOR VALVE SEAT Z27509
68 Z27565 O-RING FOR VALVE CAGE
69 Z27600 VALVE SPINDLE WITH ROTATION WING FOR EXHAUST VALVE
70 Z27700 RELIEF VALVE COMPLETE( Z27701-Z27712)
71 Z27702 VALVE SEAT FOR RELIEF VALVE
72 Z27710 O-RING
73 Z27712 JONIT RING FOR VALVE SEAT Z27702
74 Z27720 INDICATOR VALVE COMPLETE
75 Z33801 ELASTIC SCREW FOR SCREW CONNECTION PISTON ROD
76 Z33807 TAB WASHER
77 Z34010 ELASTIC SCREW FOR PISTON
78 Z34027 O-RING FOR PISTON ROD Z34201
79 Z34028 O-RING
80 Z34030 O-RING
81 Z34101 PISTON  HEAD
82 Z34121 PISTON SKIRT
83 Z34401 PISTON TOP RING
84 Z34402 PISTON RING
85 Z34432 PISTON RING SET
86 Z42118 CAMSHAFT PIECE WITH WINGS
87 Z42129 bush for 42125   
88 Z42165 flat bar for sleeve z42125 and z42130
89 Z42178 locking plate for z42165
90 Z42185 cam for fuel pump 
91 Z53228 PISTON JOINT RING FOR PISTON Z 53203
92 Z53229 ROD JOINT RING FOR HOUSING & GUIDE BUSH
93 Z53230 O-RING FOR VALVE HOLDER      
94 Z53231 O-RING FOR VALVE HOUSING  
95 Z53232 O-RING FOR COVER             
96 Z53233 O-RING FOR 3/2 WAY SOLENOID 
97 Z55260 PLUNGER WITH BUSH AND SPRING CARRIER COMPL
98 Z55420 ROLLER GUIDE COMPLETE
99 Z55425 ROLLER FOR ROLLER GUIDES Z 55420 AND Z 55435
100 Z55426 PIN FOR ROLLER GUIDES Z 55420 AND Z 55435
101 Z55801 SPIL VALVE WITH SEAT COMPLETE 
102 Z55805 Suction or delivery valve with seat
103 Z55815 SPRING FOR FUEL RELIEF VALVE
104 Z55819 O-RING FOR RELIEF VALVE HOUSING
105 Z64670 VALVE GROUP COMPLETE 38 PLATE GROUP
106 Z64671 FIRST PIECE FOR SCAVENGE VALVE
107 Z64672 CENTER PIECE FOR SCAVENGING VALVE
108 Z64673 END PIECE FOR SCAVENGE VALVE
109 Z64674 VALVE PLATE FOR SCAVENGING VALVE  T = 0.2mm
110 Z67300 WATER SEPARATOR AFTER AIR COOLER
111 Z67301 WATER SEPARATOR-PACK 7 GROUP
112 Z84430 CASING FOR HYDRAULIC PIPING
113 Z84440 CASING FOR HYDRAULIC PIPING
114 Z84459 JOINT RING FOR HYDRAULIC PIPING
115 Z84460 JOINT RING FOR HYDRAULIC PIPING
116 Z84491 O-RING FOR HOUSING
117 Z84492 O-RING FOR JOINT RING
118 Z84493 O-RNG FOR GUIDE PIPE
119 Z87048 FUEL PRESS. PIPE FOR FUEL INJECTION VALVE
120 Z87055 FUEL PRESS. PIPE FOR FUEL INJECTION VALVE
121 Z87065 FUEL DISTRIBUTOR FOR FUEL INJECTION VALVE
122 Z87080 O ring
123 Z87148 Fuel pressure pipe
124 Z87149 Fuel pressure pipe
125 Z87150 Fuel pressure pipe
126 Z87156 Claw  
127 Z87158 Coupling nut
128 Z87751 Fuel shut-off cock,complete
129 Z87754 Nipple   
130 Z87759 Spindle head
131 Z92021 THERMOMETER 100C TYPE: M20 L=80MM
  
SULZER RTA76 
1 R21550 LUBRICATING COMPLETE (R21551~R21556)
2 U21300 Water guide jacket for cyl.liner
3 U21400 CYLINDER LINER  DRAWING NO.:0-107.250.093
4 U21410 JOINT RING ON CYLINDER LINER
5 U21411 RUBBER RING FOR WATER GUIDE JACKET
6 U21412 RUBBER RING FOR CYLINDER LINER
7 U21450 IVO PLUNGER-TYPE DISTRIBUTOR
8 U21500 LUBRICATING QUILL WITH ACCUMULATOR COMPLETE
9 U21505 DIAPHRAGM FOR ACCUMULATOR QUILLS
10 U21506 PISTON FOR ACCUMULATOR
11 U21508 COMPRESSION SPRING FOR ACCUMULATOR
12 U21515 NON-RETURN VALVE    
13 U21524 JOINT RING FOR ACCUMULATOR QUILLS
14 U21550 LUBRICATING COMPLETE ( U21551-U21556)
15 U23101 SCRAPER RING IN THREE PARTS COMPLETE           
16 U23102 SEALING RING IN THREE PARTS COMPLETE
17 U23103 GUIDE RING ON GLAND BOX 
18 U23107 CLAMP ON GALD BOX ( 3PCS/ GLAND)
19 U23119 OIL SCRAPPER RING IN 3 PARTS,COMPLETE W/ PIN
20 U23120 OIL SCRAPPER RING IN 3 PARTS COMPLETE
21 U23121 OIL SCRAPER RING WITH PIN 15MM
22 U23122 OIL SCRAPER RING 3-PARTS COMPLETE 15MM
23 U23123 OIL TIGHT RING IN 3 PARTS COMPLETE W/ PIN  
24 U23124 OIL TIGHT RING IN 3 PARTS COMPLETE
25 U23125 EXTENSION SPRING
26 U23126 EXTENSION SPRING
27 U23127 EXTENSION SPRING
28 U23128 O-RING FOR UPPER HOUSING
29 U23129 O-RING FOR RING HOLDER
30 U23130 O-RING FOR LOWER HOUSING U23116  
31 U23188 O-RING FOR UPPER HOUSING U23112  
32 U27104 ELASTIC STUD FOR STARTING AIR VALVE U27400
33 U27106 ELASTIC STUD FOR RELIEF VALVE U27700
34 U27205 WASHER FOR FUEL INJECTION VALVE
35 U27208 DISC SPRING FOR FUEL INJECTION VALVE
36 U27210 SPINDLE FOR FUEL INJECTION VALVE
37 U27213 NOZZLE TIGHTENING NUT FOR FUEL INJECTION VALVE
38 U27215 CIRCULATION VALVE FOR FUEL INJECTION VALVE,
39 U27224 O-RING FOR HOUSING
40 U27225 O-RING FOR SPRING TENSIONER
41 U27226 O-RING FOR CIRCULATING VALVE
42 U27242 NOZZLE BODY WITH NEEDLE FOR FUEL INJ. V/V
43 U27243 O-RING FIXING NUT
44 U27404 BUSH FOR COVER U27403
45 U27408 VALVE SPINDLE FOR STARTING AIR VALVE
46 U27424 PISTON RING FOR STARTING AIR VALVE
47 U27425 PISTON RING FOR STARTING AIR VALVE
48 U27426 PISON RING FOR STARTING AIR VALVE
49 U27427 ROD SEAL RING FOR BUSH
50 U27429 O-RING FOR HOUSING
51 U27430 O-RING FOR BUSH U27407
52 U27431 JOINT RING FOR VALVE SEAT U27431
53 U27508 VALVE SEAT FOR VALVE CAGE
54 U27510 O-RING FOR VALVE SEAT
55 U27518 VALVE SPINDLE WITH ROTATION RING
56 U27522 GUIDE BUSH FOR VALVE SPINDLE U27518
57 U27523 RETAINING RING FOR EXHAUST VALVE
58 U27524 CYLINDER FOR EXHAUST VALVE
59 U27525 DISTANCE SLEEVE FOR EXHAUST VALVE
60 U27526 NUT FOR VALVE SPINDLE
61 U27527 SECURITY SLEEVE FOR VALVE SPINDLE
62 U27529 BUSH FOR EXHAUST VALVE
63 U27530 RETAINING RING FOR BUSH U27529 
64 U27535 LOCKING RING, TWO PARTS,FOR V/V SPINDLE U27518 
65 U27538 SEALING AIR THROTTLE COMPL.
66 U27539 JOINT RING FOR SEALING AIR THROTTLE U27538
67 U27546 PISTON JOINT RING WITH GASTIGHT SNAP
68 U27547 PISTON JOINT RING FOR AIR CYLINDER  HOUSING U27511 
69 U27548 ROD JOINT RING FOR VALVE SPINDLE 
70 U27549 O-RING FOR VALVE SEAT U27508
71 U27550 O-ring
72 U27551 O-RING FOR VALVE CAGE U27502
73 U27552 O-RING FOR BUSH
74 U27555 JOINT RING FOR VALVE SEAT
75 U27564 TENSION SPRING FOR LOCKING RING U27535
76 U27565 SHIM RING FOR DAMPING ELEMENT
77 U27580 SCREW PLUG FOR HOUSING
78 U27584 Locking Plate
79 U27585 Locking Plate
80 U27702 VALVE SEAT FOR RELIEF VALVE
81 U27703 VALVE BODY FOR RELIEF VALVE
82 U27707 COMPRESSION SPRING FOR RELIEF VALVE
83 U27710 O-RING FOR RELIEF VALVE
84 U27712 JOINT FOR VALVE SEAT
85 U27721 INDICATOR VALVE CONNECTION, M20 X 15
86 U27722 ADAPTOR FOR INDICATOR VALVE
87 U27723 FLANGE FOR INDICATOR COCK
88 U27724 JOINT RING FOR INDICATOR VALVE
89 U34002 NUT FOR ELASTIC STUD U34107
90 U34003 LOCKING DISC FOR NUT U34002
91 U34004 LOCKING DISC FOR NUT U34231
92 U34005 CONNECTION PIECE FOR PISTON COOLING ( OUTLET )
93 U34006 CONNECTION PIECE FOR PISTON COOLING ( INLET )
94 U34010 FLANGE FOR RUNNING PIECE U34230
95 U34012 LOCKING PLATE FOR FLANGE U34010
96 U34013 LOCKING PLATE LOCKING DISC U34003
97 U34014 O-RING FOR U34005 & U34006
98 U34015 O-RING FOR RUNNING PIPE
99 U34016 ROUND RUUBER RING FOR PISTON SKIRT
100 U34017 ROUND RUBBER RING BETWEEN UPPER PAT & LOWER PART 
101 U34021 SCREW FOR SEALING PLTE U34020
102 U34028 SCREW PLUG FOR SEALING PLATE U34020
103 U34101 Piston head CCS Certificate
104 U34102 PISTON HEAD CCS CERT.
105 U34107 ELASTIC STUD OF PISTON
106 U34109 ELASTIC STUD WITH COLLAR ON PISTON
107 U34121 Piston Skirt complete
108 U34122 PISTON SKIRT WITH RUBBING RING COMPL.   
109 U34123 RUBBING RING FOR PISTON SKIRT
110 U34125 PISTON SKIRT ( 2 PARTS) COMPLETE WITH RUBBING RING
111 U34230 RUNNING PIECE FOR PISTON
112 U34231 NUT FOR CONNECTING PIECE U43005 & U34006
113 U34401 PISTON RING
114 U34403 PISTON RING
115 U36160 STAND PIPE PISTON COOL INLET COMP
116 U36162 INLETE NOZZLE FOR STAND PIPE
117 U36163 GUIDE BUSH FOR STAND PIPE 
118 U36166 DISTANCE TUBE FOR STAND PIPE
119 U36171 UPPER O-RING FOR STAND PIPE 
120 U36172 LONG O-RING FOR STAND PIPE 
121 U36173 INJECTION TUBE FOR INLETE NOZZLE
122 U36175  STAND PIPE PISTON COOL OUTLET COMP;
123 U36176 OUTLET NOZZLE ON STAND PIPE
124 U36203 SCRAPER RING ON GLAND BOX
125 U36205 JOINT RING IN 3 PARTS COMP.
126 U36206 SCRAPPER RING IN 3 PARTS COMP.
127 U36207 CLAMP ON GLAND BOX
128 U36210 TENSION SPRING FOR SCRAPER RING
129 U36211 TENSION SPRING FOR GUIDE RING
130 U36216 O-ring
131 U36217 O-RING FOR RING HOLDER
132 U36306 JOINT BETWEEN HOUSING AND SIGHT GLASS
133 U46003 PRESSURE REDUCER FOR CONTROL AIR SUPPLY
134 U53211 Bush for Intermediate piece
135 U53212 Guide bush for spindle U53206
136 U53225 O-ring for Intermediate piece
137 U53226 Piston joint ring for Piston U53207
138 U53227 Rod joint ring
139 U55260 PLUNGER WITH BUSH
140 U55422 ROLLER FOR ROLLER GUIDES U55420 AND U55475
141 U55504 PISTON RING FOR PISTON U55503 
142 U55801 SPILL VALVE WITH SEAT COMP.
143 U55801 SPILL VALVE COMPLETE
144 U55805 SUCTION OR DELIVERY VALVE WITH SEAT COMP
145 U55830 PRESSURE BUSH FOR SUCTION
146 U55831 PRESSURE BUSH FOR DELIVERY VALVE
147 U55833 PUSH ROD WITH GUIDE ASS'Y
148 U55841 COMPRESSION SPRING FOR SUCT.AND SPILL V/V
149 U55842 COMPRESSION SPRING FOR DELIVERY V/V
150 U55856 JOINT FOR STUD COUPLING U55852
151 U64670 Valve group,complete
152 U64671 FIRST PIECE FOR SCAVENGE VALVE
153 U64672 CENTER PIECE FOR SCAVENGE VALVE
154 U64673 END PIECE FOR SCAVENGE VALVE
155 U64674 VALVE PLATE FOR SCAVENGE VALVE 0.2MM
156 U64674 VALVE PLATE FOR SCAVENGE VALVE 3MM
157 U81385 EXPANSION PIECE BEFORE TURBOCHARGER
158 U87041 FUEL HIGH PRESSURE PIPE
159 U87042 F.O HIGH PRESSURE PIPE
160 U87044 F.O HIGH PRESSURE PIPE
161 U87046 F.O HIGH PRESSURE PIPE
162 U87048 COUPLING PIECE FOR FUEL PIPE
163 U87049 COUPLING PIECE FOR FUEL PIPE
164 U87050 COUPLING PIECE FOR FUEL PIPE
165 U87520 O-RING FOR METALLIC HOSE
166 U87521 O-RING FOR FUEL OIL PRESSURE PIPE U87082
167 U87751 FUEL SHUT-OFF VALVE
168 U87757 JOINT ON NIPPLE U87754
169 94145-4A O-ring to rod joint ring 130x125x3.8
170 94145-4B Slide ring to piston joint ring 130x125x3.8
171 94145-4C O-ring to rod joint ring 85x89x3.8
172 94145-4D Slide ring to piston joint ring 85x89x3.8
173 94180-4A O-ring to rod joint ring 360x352x5.8
174 94180-4B Slide ring to piston joint ring 360x352x5.8
175 94180-4C O-ring to rod joint ring 220x226x5.8
176 94180-4D Slide ring to piston joint ring 220x226x5.8
177 94215 4 Connecting Nipple Pretensioning Jack to the cylinder cover studs
178 94251-6 Connecting Nipple  Pretensioning Jack to the Exhaust valve
179 94252-4 Connecting Nipple Pretensioning Jack to the Exhaust valve cage
180 94260-1 Spring Dowel Pin  Valve seat with drawing device
181 94260-11 Tapped Pin  Valve seat with drawing device
182 94260-12 Vent Screw  Valve seat with drawing device
183 94260-13 Piston  Valve seat with drawing device
184 94260-14 Cylinder  Valve seat with drawing device
185 94313-2A O-ring to rod joint ring 265x259x5.8
186 94313-2B Slide ring to piston joint ring 265x259x5.8
187 94313-2C O-ring to rod joint ring 160x165x3.8
188 94313-2D Slide ring to piston joint ring 160x165x3.8
189 94314-6A O-ring to rod joint ring 190x184x5.8
190 94314-6B Slide ring to piston joint ring 190x184x5.8
191 94314-6C O-ring to rod joint ring 140x145x3.8
192 94314-6D Slide ring to piston joint ring 140x145x3.8
193 94424-10 Connecting Nipple
194 94424-1A O-ring to rod joint ring 90x86x3.8
195 94424-1B Slide ring to piston joint ring 90x86x3.8
196 94706-2A O-ring to rod joint ring 120x115x3.8
197 94706-2B Slide ring to piston joint ring 120x115x3.8
198 94706-2C O-ring to rod joint ring 70x74x3.8
199 94706-2D Slide ring to piston joint ring 70x74x3.8
200 94425 CONNECTION
201 94426 CONNECTION
202 94427 CONNECTION 
203 94429 HIGH PRESS HOSE (2000 KG/CM2 STEEL PIPE)
  
SULZER RTA84 
1 U21411 RUBBER RING FOR WATER GUIDE JACKET
2 U21450 IVO PLUNGER-TYPE DISTRIBUTOR
3 U21503 CONNECTION PIECE FOR ACCUMULATOR
4 U21505 DIAPHRAGM FOR ACCUMULATOR
5 U23103 GUIDE RING
6 U23109 JOINT SEGMENT
7 U23113 OIL SCRAPER RING IN THREE PARTS COMPLETE
8 U23114 OIL SCRAPER RING IN THREE PARTS COMPLETE
9 U23115 JOINT RING IN THREE PARTS, COMPLETE  
10 U23115 JOINT RING IN 3-PARTS COMPLETE.
11 U23119 OIL SCRAPER RING IN 3-PARTS COMPLETE
12 U23119 OIL SCRAPER RING IN 3-PARTS COMPLETE
13 U23122 SCRAPER RING IN 3-PARTS COMPL.
14 U23125 EXTENSION SPRING FOR U23107
15 U23126 EXTENSION SPRING FOR CLAMP RING
16 U23128 O-RING FOR UPPER HOUSING
17 U23129 RUBBER RING FOR RING HOLDER
18 U23130 O-RING FOR LOWER HOUSING
19 U27114 SCREW PLUG FOR CYLINDER COVER
20 U27116 RUBBER RING FOR CYLINDER COVER
21 U27206 DOWEL PIN FOR NOZZLE HOLDER
22 U27215 CIRCULATION VALVE FOR FUEL INJECTION VALVE
23 U27216 NEEDLE SEAT WITH NEEDLE FOR CIRCULATION VALVE
24 U27218 CONNECTING PIECE FOR CIRCULATION VALVE
25 U27219 CONNECTION PIECE FOR CIRCULATION VALVE
26 U27222  SOCKET HEAD CAP SCREW FOR NOZZLE HOLDER
27 U27223 SLEEVE FOR TWO PIECE NOZZLE
28 U27224 O RING FOR NOZZLE HOLDER
29 U27225 O-RING FOR SPRING TENSIONER
30 U27226 O RING FOR CIRCULATION VALVE
31 U27227 DOWEL PIN FOR ATOMIZER
32 U27228 DOWEL PIN FOR NOZZLE BODY
33 U27240 NOZZLE COMPLETE TYPE : 5x0.775x0.750x0.725/0.650/0700R
34 U27242 NOZZLE F/J VALVE (TWO PIECE NOZZLE) WN3 194.894.200.N12.0001
35 U27242 NOZZLE BODY WITH NEEDLE FOR FUEL INJECTION VALVE 2 PIECE TYPE
36 U27244 ATOMIZER FOR F/J VALVE MNS 3
37 U27401 HOUSING
38 U27408 VALVE SPINDLE FOR STARTING AIR VALVE
39 U27410 CONNECTING PIECE FOR STARTING AIR VALVE
40 U27413 SPINDLE GUIDE FOR STARTING AIR VALVE
41 U27414 VALVE SEAT
42 U27418 COMPRESSION RING
43 U27421 DOWEL PIN
44 U27425 PISRON RING FOR STARTING AIR VALVE
45 U27426 PISTON RING FOR STARTING AIR VALVE
46 U27427 ROD SEAL RING
47 U27429 O-RING FOR STARTING AIR VALVE HOUSING
48 U27430 O-RING FOR BUSH
49 U27431 JOINT RING FOR HOUSING
50 U27435 NUT FOR VALVE SPINDLE
51 U27436 SCREW-IN UNION FOR COVER
52 U27437 SCREW-IN UNION FOR 5/2 WAY U27415
53 U27508 VALVE SEAT TO VALVE CAGE U27502
54 U27518 VALVE SPINDLE WITH ROTATING WING FOR WING FOR EXHAUST VALVE
55 U27548 ROD JOINT FOR VALVE SPINDLE U27518
56 U27551 O-RING FOR VALVE CAGE U27502 & U27508
57 U27555 JOINT RING FOR VALVE SEAT (U27508)
58 U27724 JOIN RING FOR INDICATOR VALVE
59 U34002 NUT FOR ELASTIC STUD U23107
60 U34004 LOCKING DISC FOR NUT U34231
61 U34005 CONNECTION PIECE FOR PISTON COOLING OUTLET
62 U34006 CONNECTION PIECE FOR PISTON COOLING INLET
63 U34010 FLANGE FOR RUNNING PIPE U34230
64 U34014 O-RING FOR CENTRE PIECE
65 U34015 O-RING FOR RUNNING PIPE
66 U34016 ROUND RUBBER RING FOR PISTON SKIRT
67 U34017 ROUND RUBBER RING BETWEEN PISTON UPPER AND LOWER PART
68 U34021 SCREW FOR SEALING PLATE
69 U34104 O-RING FOR U34005 AND U34006 
70 U34108 LOCATING SCREW FOR ELASTIC STUD
71 U34109 ELASTIC STUD WITH COOLAR ON PISTON
72 U34121 PISTON SKIRT COMPLETE ( U34122 + U34123)
73 U34122 PISTON SKIRT
74 U34125 PISTON SKIRT 2PARTS COMPLETE
75 U34230 RUNNING PIPE FOR PISTION
76 U34231 NUT FOR CONNECTING PIECE U34005 & U34006
77 U34401 PISTON RING    580x12
78 U34405 PISTON RING  (Oblique cut) 580x12x14mm
79 U36170 LOCKING PLATE FOR STAND PIPE
80 U36171 UPPER O-RING FOR STAND PIPE
81 U36172 LOWER O-RING FOR STAND PIPE
82 U36205 JOINT RING IN 3-PARTS ON GLAND BOX COMPLETE
83 U36206 SCRAPER RING IN 3-PARTS ON GLAND BOX
84 U36210 TENSION SPRING FOR GUIDE RING U 36206
85 U36211 TENSION SPRING FOR GUIDE RING U 36204
86 U43120 STRAIGHT CUT OFF VALVE COMPLETE
87 U43122 PISTON FOR CUT OFF VALVE
88 U43124 SEATING RINGS FOR U 43122
89 U46002 PRESSURE REDUCER FOR CONTROL AIR
90 U46003 PRESSURE REDUCER, COMPLETE FOR SAFETY CONTROL AIR
91 U46006 AIR FILTER FOR CONTROL SUPPLY
92 U55260 PLUNGER WITH BUSH AND SPRING CARRIER COMPL
93 U55462 PRESSING NIPPLE FOR GUIDE BUSH PLUNGER
94 U55542 ROLLER GUIDE FOR FUEL PUMP COMPLETE
95 U55562 COMPRESSION SPRING FOR PLUNGER 
96 U55801 SPILL VALVE WITH SEAT COMPLETE
97 U55805 SUC. OR DEL. VALVES W/SEAT COMPLETE
98 U55830 PRESSURE BUSH FOR SUCT / SPILL VALVES
99 U55831 PRESSURE BUSH FOR DELIVERY VALVE
100 U55841 COMPRESSION SPRING FOR SUC/SPILL VALVE
101 U55842 COMPRESSION SPRING FOR DELIVERY VALVE
102 U72110 SIGHT GLASS INDICATOR COMPLETE FOR CYLINDER LUBRICATING PUMP
103 U72123 SIGHT GLASS FOR U72111  WITH 8 DELIVERY PIPES 
104 U87042 FUEL PRESSURE PIPE COMPLETE
105 U87048 COUPLING PIECE FOR FUEL PRESSURE PIPE
106 U87049 COUPLING PIECE FOR FUEL PRESSURE PIPE
107 U87050 COUPLING PIECE FOR FUEL PRESSURE PIPE
108 U87082 FUEL PRESSURE PIPE COMPL. CONICAL END
109 U87087 FUEL PRESSURE PIPE COMPL.
110 U87092 FUEL PRESSURE PIPE COMPL.
111 U87097 FUEL PRESSURE PIPE COMPL. CONICAL END
112 U94252 CAGE (SET OF SEATING) RINGS
113 U94937 HYDRAULIC JACK 10t

 

來源:秦皇島宏洋船舶機械設備有限公司

聯系人:杜宏
電 話:0335-5890202
                    8575688
傳   真:0335-8576866
手 機:13833509980
E-mail :hymarine@163.com
地 址:秦皇島市經濟技術開發區渭水道4號科技園創中心311室

  • 1
  • 2
  • 3
内蒙古快3重点推荐